- 1Requirements
- Volkswagen RNS315/RNS310 mmctools. Tested on Volkswagen Passat B7 w/ RNS315 (might work on other non-VW cars?) Built from Linux sources / Compiled for amd64; Should also work on Skoda/Seat/Audi with similar navs; This is a tool that lets you turn Generic SD Card/Samsung EVO card to be recognized by the RNS as a Map Update card.
- Aug 17, 2012 Join Date Sep 29th, 2000 Location Chicago Posts 650 Vehicles 2018 R Oryx White.
RNS315 VWZAZ2.-RNS310 BOSCH(ALL RADIOS)-RNS310 BLAUPUNKT (NOT ALL SERIALS) Make note: No spamming this post with a other radios models,only this can unlock but not all for the moment! Codes send same day instant or with delayed time,because need have acces on me PC. After received code please come back with rezult!
Requirements
Gateway
The Gateway (aka. Diagnostic Interface for Databus OR CAN-Gateway) is responsible for passing Messages from one Control Module to another, older versions of the Gateways were not compatible and wouldn't allow a Diagnostic Tool like VCDS to communicate with the new Radio Navigation System.
In this Example the Software Part Number is 1K0-907-530-Q, only Gateways with this Part Number (or newer) are known to be compatible with the RNS310. For the VW Passat (3C) only Gateways with the Part Number 3C0-907-530-E (or newer) are known to be compatible.
Installation & Wiring
In this Example the Software Part Number is 1K0-907-530-Q, only Gateways with this Part Number (or newer) are known to be compatible with the RNS310. For the VW Passat (3C) only Gateways with the Part Number 3C0-907-530-E (or newer) are known to be compatible.
Installation & Wiring
Additional Information can be found in the Repair Manuals, the Wiring Diagrams, the Parts Catalog and/or the Instructions included in the Retrofitting Kit.
Configuration
Calculator Code Rns315 Rns310 Sbi
The following Activations are necessary to ensure that the newly fitted parts are properly recognized and are ready to use.
- Update the Installation List in the Gateway (J533 / #19).
- Register the newly added 37 - Navigation Control Module, in case you had a Navigation System installed before the Retrofit this step may not be necessary. Address 56 - Radio should also be activated in case there was no Radio installed prior to the Retrofit. Even though Address 56 - Radio is registered, the RNS310 will NOT communicate via that Address - you have to use 37 - Navigation instead.
- Update the Navigation System (J506 / #37) Coding.
- Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.
- Make sure to enter a Plausible WorkShopCode (WSC) like 12345-123-12345 on the Coding Screen, new or reflashed RNS510 units may have a WSC 00000-000-00000 stored which results in a 01042 - Control Module Not Coded Fault Code.
Calculator Code Rns 315 Rns310
If you are having trouble finding/calculating the proper Coding using the Long Coding Assist please Contact us directly. Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.
Calculator Code Rns315 Rns310 Sheet
